Troldtekt v-line 1way gives you a uniform ceiling with longitudinal grooves cut into the surface. The solution adds a distinctive look to the interior design – for example in private homes and offices.
Half grooves cut into the panel’s longitudinal edges create an extra groove when two panels are installed side by side. The ends of the panels are square-edged and therefore flush when installed for a clean, smooth finish.
Troldtekt v-line is based on the classic 25 mm Troldtekt panels unlike the other Troldtekt design solutions, which are 35 mm thick. The v-shaped grooves results in a more discreet look than when using the more distinctive Troldtekt line panels which have deeper grooves.
The thinner dimensions also mean that Troldtekt v-line is just as light as the classic Troldtekt panel, and can be produced at very competitive prices.
Troldtekt® v-line 1way
Solutions for rooms of all sizes
Troldtekt v-line 1way is available with either 6 or 10 milled grooves. In both variants, the individual grooves are evenly spaced.
Especially in rooms with a relatively low ceiling height, the panels with 10 grooves help to create a finish reminiscent of wooden strip ceilings. For larger rooms with higher ceilings, the six-groove variant stands out more.
Precision and flexibility
If greater flexibility is needed when installing Troldtekt v-line 1way panels, they can be combined with the panel type Troldtekt v-line 1way blank.
The v-line blank panel has exactly the same dimensions and edge design, but without any v-shaped grooves on the actual panel surface. This guarantees a more precise finish when installing, for example, skylights, spots, an extractor fan etc. in a ceiling.
A row of Troldtekt v-line blank panels can also ensure a nice clean finish along the walls in slightly asymmetrical or otherwise irregular rooms.